Chicken Fried Steak Recipe
Beef,  Delicious,  Game Day,  Sauce

Chicken Fried Steak and Gravy

I never knew much about chicken fried steak while growing up, at least not that I recall. I grew up in Indiana, and as some may define that as the south, there is a bit of a difference when it comes to southern cooking. Sure there was plenty of great corn and tomatoes to be had, but there was not much of chicken fried steak. Not that it was a bad thing. My parents actually knew how to fry a couple of good things. One of which I have to keep my mouth locked on, however I am not sure why, as people are already making this ‘secret’ recipe, and the other being some great fried chicken in a cast iron skillet.

Chicken Fried Steak Recipe

I was first introduced to chicken fried steak at a greasy spoon in Dallas, Texas. It was late, as usual, and when I mean greasy spoon, I mean that smoked filled, dirty diner, where you go for one thing, and one thing only. Chicken fried steak and biscuits and gravy. I fell in love with it. At the time,  all I knew was it was this unknown type of meat, breaded and fried, and smothered in a white gravy. It was a late night, after bar, stick to your belly, paradise. It was right up there with the great memories of Tex Mex cuisine as well.

So not long ago, the thought of chicken fried steak came to mind. This dish is really easy to make, takes very little time, and yields huge flavor. Enough to satisfy an early morning, or a  late afternoon. I left the late night out of the scene here, because it is now often difficult for me to stay up past eleven at night. Kidding aside, lets get started.

Ingredients:

  • 2 cups of vegetable oil
  • 1 1/2 lbs of round steak, cut into four chunks, pounded out about 3/4 inch thick
  • 3 tsp black pepper
  • 2 tsp salt
  • 1 tbsp water
  • 2 large eggs, beaten with 3 tbsp milk
  • 3 1/4 cup of milk
  • 2 cups of all purpose flour, plus another 1/4 cup for just the gravy

Begin by heating the oil in a medium cast iron skillet. In my opinion, the cast iron is the way to go, and I have been using these skillets in most of my cooking nowadays. In the meantime, place a chunk of steak in between two large pieces of plastic wrap, and with a meat mallet, tenderize the meat, pounding out from the center, outwards, until you have about 3/4 inch thick. If you want it thinner, keep pounding it out. Repeat with the remaining chunks of meat.

Next, build your dredging station. Take the eggs and beat it with 3 tablespoons of the milk.  Next, to a medium casserole dish, add two cups of the flour, and a two teaspoons of the salt and one teaspoon of the pepper. Mix well.

Dip your meat into flour, lightly coat, the, dip into the  egg wash, then back into the flour mixture. Set on a rack for a couple of minutes until you have another one coated. Repeat with the other two.

Your oil should be around 350-370 degrees. Carefully add a steak into skillet, and fry for about 3-5 minutes on each side. You will notice that the juices will begin to sprout up while you are frying. When you flip to fry the other side, make sure the juices run clear.

Preheat your oven to 225 degrees. Once the steaks are fried, place them in the oven to keep warm as you make the gravy.

Carefully drain about 90% of the oil. You want to reserve  a bit of the oil because you are going to brown the flour. So, with the remaining oil, probably four tablespoons or so, add in a quarter cup of the flour, and whisk, continuing to whisk for about two minutes.  Add in the milk, about a cup at a time, roughly every four minutes or so, and continue to whisk. This is the labor intensive part, but oh so worth it. Season generously with black pepper and a bit more salt. Yes, continue to whisk.

Taste and season the gravy accordingly. Keep whisking. Once the gravy comes to a boil, reduce the heat to low, and continue to whisk.  The gravy should be thick, but not too thick. If it becomes too thick because you haven’t whisked enough, add a bit of water to thin it out just a bit, but remember to whisk.

Remove one of the steaks from the oven, plate, and ladle the gravy over the top. Serve with your favorite biscuits.

Thank you Dallas, Texas for introducing me to something so wonderful. Enjoy.

 

Chicken Fried Steak Recipe

Chicken Fried Steak and Gravy

Dax Phillips
Course Main Course

Ingredients
  

  • 2 cups of vegetable oil
  • 1 1/2 lbs of round steak cut into four chunks, pounded out about 3/4 inch thick
  • 3 tsp black pepper
  • 2 tsp salt
  • 1 tbsp water
  • 2 large eggs beaten with 3 tbsp milk
  • 3 1/4 cup of milk
  • 2 cups of all purpose flour plus another 1/4 cup for just the gravy

Instructions
 

  • Begin by heating the oil in a medium cast iron skillet. In my opinion, the cast iron is the way to go, and I have been using these skillets in most of my cooking nowadays. In the meantime, place a chunk of steak in between two large pieces of plastic wrap, and with a meat mallet, tenderize the meat, pounding out from the center, outwards, until you have about 3/4 inch thick. If you want it thinner, keep pounding it out. Repeat with the remaining chunks of meat.
  • Next, build your dredging station. Take the eggs and beat it with 3 tablespoons of the milk. Next, to a medium casserole dish, add two cups of the flour, and a two teaspoons of the salt and one teaspoon of the pepper. Mix well.
  • Dip your meat into flour, lightly coat, the, dip into the egg wash, then back into the flour mixture. Set on a rack for a couple of minutes until you have another one coated. Repeat with the other two.
  • Your oil should be around 350-370 degrees. Carefully add a steak into skillet, and fry for about 3-5 minutes on each side. You will notice that the juices will begin to sprout up while you are frying. When you flip to fry the other side, make sure the juices run clear.
  • Preheat your oven to 225 degrees. Once the steaks are fried, place them in the oven to keep warm as you make the gravy.
  • Carefully drain about 90% of the oil. You want to reserve a bit of the oil because you are going to brown the flour. So, with the remaining oil, probably four tablespoons or so, add in a quarter cup of the flour, and whisk, continuing to whisk for about two minutes. Add in the milk, about a cup at a time, roughly every four minutes or so, and continue to whisk. This is the labor intensive part, but oh so worth it. Season generously with black pepper and a bit more salt. Yes, continue to whisk.
  • Taste and season the gravy accordingly. Keep whisking. Once the gravy comes to a boil, reduce the heat to low, and continue to whisk. The gravy should be thick, but not too thick. If it becomes too thick because you haven’t whisked enough, add a bit of water to thin it out just a bit, but remember to whisk.
  • Remove one of the steaks from the oven, plate, and ladle the gravy over the top. Serve with your favorite biscuits.

 

23 Comments

  • Palladini

    I love Chicken fried steak, My better half has never had it and refuses to let me make it. Then to further compound the issue, you have to travel far in this Country, that being Canada to find this dish.

  • stephen

    Why 2 cups oil? About a quarter cup pan fry make gravy from seasoned oil(roux) Oh so good . Also use milk for liquid in gravy. Good luck. With the cost of oil this makes more sense.

    • Dax Phillips

      Thanks for the note, Stephen. I use two cups of oil in my large cast iron as I find that is a good balance of oil to cook the steaks. The steaks, along with that flour do soak up some of that oil and I find that the amount is better than adding any more oil. I also use milk for the gravy, as noted in the recipe. Thanks for stopping by!

  • Linda West

    This looks delish! The only thing missing would be some fried eggs for the morning or mashed potatoes for dinner. Can’t wait to try it. PS-Love the note about the black pepper, Can’t be made without it!

  • Tammy

    I made this tonight and my husband and I enjoyed the meal very much. I followed the directions as written. I have to say this is the first time I’ve made chicken fried steak where the breading didn’t fall off the meat after frying. I would always place the meat on paper towels to absorb the oil. I won’t do that anymore. I also placed it in the oven to stay warm and it stayed crispy. I learned something new and I’m glad I did. Thank you.

  • Robyn

    Hi Dax! My hubby is from Ireland and has never heard of most of the things I love to eat! 🙂 But I made this for him and he was over the moon! Thank you so much. Glad I discovered your page! Keep up the good cookin’.

  • suzane

    I’ve grew up cooking chicken fryed steak in gravy …….. and I use milk and little water.
    This was our main dish in the 50’s…… not new to me. enjoyed.

  • Laura K Losty

    I have been making this for many years. Sometimes I add some ground hot pepper to give it an extra kick. Being from the south, this is pretty much how it’s made. I also lived in New Mexico and that is when I experienced the hot pepper in the flour mixture. A very versatile recipe and the whisking is vital to the perfect gravy. Yummy and rib sticking in the cold weather. Love your recipes!!

  • Doris

    Growing up in an Italian family in Brooklyn NY, no one made this but when I moved to South , it’s a staple here in my home. Only thing I do differently is add seasoning salt to flour… a little goes a long way. Extra pepper in the gravy. After dipping in the flour /egg mixture, you have to let the steak rest for about 15 minutes to let the flour adhere to the meat. Cast iron pan all the way for frying. Rice or mashed potatoes for side and baby peas. Oh! Lordy…. I am getting the vapors thinking about this for dinner!

Leave a Reply

Your email address will not be published. Required fields are marked *

Recipe Rating